We all know that a sump pump is necessary for areas that experience heavy rainfall.
However, what many people don’t know is that a sump pump running no rain can actually damage the pump. There are many reasons for this. When the water level in the sump tank falls below the intake valve on the pump, the blades on the pump will start to turn. This action will create a vacuum and pull water up the discharge pipe.
In this article, we are going to learn the cause and solution of this problem which can save you money.
Cause and Solution- Sump Pump Keeps Running No Rain
When it comes to keeping your home dry in the event of a prolonged dry spell, many homeowners turn to their sump pump. However, if the pump is not properly maintained, it may keep running even when there is no rain falling. This can lead to an over-watering problem and ultimately a flooded home. Here are some causes of the sump pump pit keeps filling with no rain.
- If you notice that the pump is not kicking in when it should during heavy rains, there may be damage to the device or its wiring. Call a professional to repair it or replace it.
- A cause of a sump pump running No Rain is a blockage in the drainage system. A large leaf, branch, or rock can easily obstruct the flow of water and debris away from the sump pump, leading it to run constantly. To prevent this problem, make sure all leaves, branches, and rocks are cleared from around your sump pump and check for blockages regularly.
- The cause of a sump pump pit keeps filling no rain can be traced back to two main issues. The first issue is with the drainage system in the house. If water is pooling on the floor of the sump pump chamber, then it will not be able to operate as efficiently and may overheat.
- Another issue is with the pump itself. If it is not getting enough power from your water supply, then it may start up automatically in order to keep up with demand.
- The drainage system around the house may be blocked or malfunctioning. This can happen due to tree roots growing through the drainage pipes, debris in the pipes, or a broken-down septic system.
- One of the reasons is the sump pump may be located in an area that receives less rainfall than other parts of the home.
- To determine if your sump pump is malfunctioning, you can check for wet spots on the ground around the unit or for water flowing from the sump into the drainpipe. If there is evidence of a problem with your sump pump, you will need to take appropriate steps to repair or replace it.
- Check the sump pump power supply. Keep the pump’s 110V power supply.
- A broken seal: Another common problem with sump pumps is that they can break their seals. This means that water can escape and cause your pumps to stop working properly.
- The installation may not have been properly done. Check if it is not done properly, then that is also a reason Sump Pump keeps Running No Rain.
- The sump pump pit keeps filling no rain can happen when the sump pump‘s suction sucks up water from the basement or crawlspace and doesn’t release it fast enough. This excess water can push the system past its capacity and cause it to keep running even when there’s no rain.
To prevent this issue, install a properly-sized sump pump and check it regularly to make sure it’s working properly.
- If you are ever in a situation where there is no rain, be sure to check your pump’s battery level and have it replaced if needed.
UPC Faucet Repair- Tips & Tricks
In conclusion, a sump pump is a great way to keep your home dry in a drought. Make sure to turn it off when the rain falls to avoid wasting energy and water.